3 Sided Acoustic Wall Panels: Slats, Felt and Sizes
Start with the slat shape and felt colour when comparing the 3 Sided Acoustic Wall Panels collection. The range includes flat-fronted HDF slat panels and rounded 3D fluted wooden panels. They share a collection, but their materials, depth and appearance are not identical.
What the three-sided finish changes
On the 3 Sided Oak panel with Black Felt, the decorative Oak finish covers the front and both visible side edges of each HDF slat. This matters where you approach the wall from an angle or where a window lights the slats from the side. You see the decorative finish along the exposed sides as well as across the front.
The matching 3 Sided Oak panel with Grey Felt has the same stated 240 × 60 × 1.7 cm dimensions and HDF construction. The felt colour is the main visual choice between these two examples. Black makes the gaps more pronounced; Grey gives a softer transition between backing and Oak.
Compare the exact profiles
The Oak 3D Fluted Wood Acoustic Wall Panel has rounded wooden slats, a 22 mm overall depth, 40 mm slat width and approximately 10 mm gaps. Choose it for curved highlights across the slat faces. Those measurements belong to this fluted product and should not be transferred to the flat three-sided panels.
| Exact panel | Surface and backing | Overall size |
|---|---|---|
| 3 Sided Oak, Black Felt | HDF slats with decorative Oak on three visible faces; black felt | 240 × 60 × 1.7 cm |
| 3 Sided Oak, Grey Felt | HDF slats with decorative Oak on three visible faces; grey felt | 240 × 60 × 1.7 cm |
| Oak 3D Fluted | Rounded wooden slats; dark acoustic felt | 240 × 60 × 2.2 cm |
A wood appearance is not compulsory. The 3 Sided Concrete Effect panel with Grey Felt uses a decorative concrete effect on HDF, with the same 240 × 60 × 1.7 cm dimensions stated for the two flat Oak examples. It is an option for a stone-inspired colour scheme, not a panel made from concrete.
Count panels and check visible edges
Each of the four products discussed here is 60 cm wide and 240 cm high, giving 1.44 m² of nominal face coverage. Each has a stated minimum order of three individual panels. Do not confuse that minimum with a three-panel pack.
For a wall area 300 cm wide and 240 cm high, five full panels give 7.20 m² of nominal coverage before cutting. Three panels span 180 cm at full width. Plan around openings and check whether your end cuts leave the intended slat spacing before finalising the order.
The decorative side finish on each slat does not settle how the perimeter of the whole installation will be finished. Identify exposed panel ends, corners and cut edges separately. Confirm the required trim or finishing detail for the exact profile, particularly if you are comparing a 17 mm flat panel with a 22 mm fluted panel.
Before fitting, check the condition of the wall and confirm an adhesive or fixing method suited to the backing and substrate. Use the trims and adhesive buying guide to prepare those questions.
Three-sided panel questions
Does “3 sided” mean three panels in a pack?
No. For the named HDF panels it describes decorative coverage on the front and two visible sides of each slat. The three-panel minimum is a separate ordering requirement.
Does Black Felt perform better than Grey Felt?
The product information does not establish a performance advantage between those colours. Choose the felt colour for its appearance and ask for relevant test information if your project has a specified acoustic target.
Are all products in this collection real wood veneer?
No single material description covers the collection. The flat three-sided examples above specify HDF with a decorative finish. The Oak 3D Fluted example specifies wooden slats. Read the construction of the exact product you intend to buy.
Shop the 3 Sided Acoustic Wall Panels collection, checking the selected product and current availability. Compare the real wood slatted panel guide and the chevron layout guide, or return to the wall panel buying guide index.
