Skip to content
Transform Your Walls Today – Shop Stylish Panels Now!
Wish lists
Wish lists
Cart
0 items

Language

Wall Panel Ideas for Living Rooms

280 cm Acoustic Wall Panels: A Buying Guide for Tall Walls

by Solid Wall Panels UK 10 Nov 2026 0 comments

The useful question for a 280 cm panel is whether it can cover your intended height in one piece. Measure the finished area first, then compare the 280 cm Acoustic Wall Panels collection. The extra length can avoid a horizontal join on walls above 240 cm, but it does not increase the 60 cm panel width or remove joins between neighbouring panels.

Tall Oak slatted wall panels behind a television and low cabinet in a living room
Oak 280 cm acoustic panels shown in a room setting.

Measure the actual height to be covered

Use the proposed top and bottom edges of the panelling, rather than relying on a room height from an old plan. A feature starting above a skirting board has a different required height from a full floor-to-ceiling treatment. Measure at several positions and note changes around alcoves, beams and sloping ceilings.

If the required coverage is more than 280 cm, one upright panel will not span it. If it is much shorter, compare the amount you would cut off with a shorter format before buying. The benefit of the longer panel is a suitable continuous run, not simply having the largest size.

Choose the finish after confirming the size

Three wood veneer options share the following stated dimensions: 280 cm high, 60 cm wide and approximately 17 mm thick. Their descriptions specify approximately 25 mm slats with 15 mm gaps, mounted on acoustic felt backing.

Grey vertical slatted panels behind a sofa and side cabinet in a room setting
Grey 280 × 60 cm panels shown as a continuous vertical wall treatment.

The collection also includes marble-effect designs. Compare those separately in the marble-effect acoustic panel guide; the wood veneer specifications above describe the three named wood finishes.

Work out quantity by width, then check cutting

A 280 × 60 cm panel has a nominal face area of 1.68 m². The Oak, Grey and Walnut (Dark Oak) products above are sold as individual panels with a minimum order of two, rather than as two-panel packs. Two give 3.36 m² before cutting.

For an intended panelled area 300 cm wide and 260 cm high, five 60 cm-wide panels span the width. Those five panels provide 8.40 m² of material before cutting, while the finished rectangle measures 7.80 m². Each panel would need its height reduced from 280 cm to the required finished height. This arithmetic does not include additional material for damaged cuts, openings or changes to the layout.

Draw narrow end sections before ordering. Dividing wall area by panel area can hide awkward strip cuts, whereas plotting the 60 cm modules shows where panel edges will land. Confirm whether offcuts can serve another part of the project instead of automatically counting them as usable coverage.

Check access and fitting details before delivery

Plan how a 2.8 m-long panel will reach the room, including stairs, doorways and turning space. Ask for handling advice if access is restricted. Also confirm how the finished top, bottom and exposed sides will be treated.

The three product descriptions allow cutting to size and list screws or adhesive as fitting options. Ask which method and preparation suit your specific wall and the panel backing. A general mention of adhesive is not enough to confirm a bond on every substrate, and a ceiling installation needs its own fixing advice.

Questions about 280 cm panels

Will the longer panel cover a wider wall?

It covers more height, while the width remains 60 cm. A 300 cm-wide wall still needs five full panel widths, whether the finished height uses the entire 280 cm length or less.

Are these panels soundproof?

The product descriptions state that the felt-backed panels help reduce echo and reflected sound. They do not fully block sound transmission, and panel height alone is not an acoustic performance rating.

Can I order one panel for a narrow section?

The three wood finishes discussed here specify a two-panel minimum. Check the current product page before ordering and plan whether the remaining material has a useful place in your layout.

Shop 280 cm Acoustic Wall Panels and confirm your selected finish and current availability. For other sizes and fitting supplies, see the slatted wall panel guide and accessories buying guide. The wall panel buying guide index covers the full range.

Prev post
Next post

Leave a comment

All blog comments are checked prior to publishing

Thanks for subscribing!

This email has been registered!

Shop the look

Choose options

Wall with striped design and text 'SOLID WALL PANELS UK' with two chairs below.
Sign Up for exclusive updates, new arrivals & insider only discounts
Edit option
Back In Stock Notification

Choose options

this is just a warning
Login
WhatsApp